• Pump body, impeller, cap and suction grid in technopolymer.
• Motor, rotor shaft and screws in stainless steel.
• Triple O-ring seal interposed with an oil precombustion chamber.
• Continuous duty submersible asynchronous motor.
• Stator fitted in an airtight stainless steel casing.
• Rotor mounted on over dimensioned, greased-for-life ball bearings.
• Built-in thermal and current overload protection and a capacitor permanently on in the single-phase version. For the protection of the three phase motor it is advisable to use a suitable overload protection complying with the regulations in force.
• Supplied with standard 5 meters HO5RN-F power cable for the single-phase version.
• Supplied with standard 5 meters of HO7RN-F power cable for the three-phase version.
• For the single-phase the standard is a SCHUKO plug EEC VII.
For special version available with special stainless steel motor shaft.
Operating range: from 1 to 16m³/h with head up to 10.3 meters
Liquid temperature range: from 0°C to +35°C for domestic use
Pumped liquid characteristics: fiber-less murky water
Granulometric passage
through the suction grid: 10 mm
Maximum immersion depth: 7 meters
Maximum dry running time: 1 minute
Protection level: IP 68
Insulation class: F
CODE DESCRIPTION
NOVA600-M SUBMERSIBLE PUMP FOR FIBER-LESS MURKY WATER – 0.8KW 1×220-240V – MIN SUCTION DEPTH 175MM
NOVA600-T SUBMERSIBLE PUMP FOR FIBER-LESS MURKY WATER – 0.8KW – 3×400 – MIN SUCTION DEPTH 38MM
NOVA600-M-SV* SUBMERSIBLE PUMP FOR FIBER-LESS MURKY WATER – 0.8KW 1×220-240V – MIN SUCTION DEPTH 175MM – STAINLESS STEEL MOTOR SHAFT
NOVA600-T-SV* SUBMERSIBLE PUMP FOR FIBER-LESS MURKY WATER – 0.8KW – 3×400 – MIN SUCTION DEPTH 38MM – STAINLESS STEEL MOTOR SHAFT
العربية
Reviews
There are no reviews yet, would you like to submit yours?