FILTERING SUPPLY

FLOCCULANT CARTRIDGE

Improves sand filtration skill.
• Clarifies murky water by gathering suspended particles.
• Suitable for all sand filter equipment.
INSTRUCTIONS:
Every 10 to 15 days, a cartridge for 6600 gal. (25 m3) in the pump prefilter or in the skimmer basket after a filter washing.

FLOCCULANT POWDER

Improves sand filtration skill.
• Clarifies murky water by gathering suspended particles.
• Suitable for all sand filter equipment.
INSTRUCTIONS:
Provide 0.4 lb. per 2600 gal. (200 g per 10 m3). Dissolve directly in a watering can (with warm water) and spread the solution around the pool. Recommended pH: lower than 7.4. In the hours following: the water gets clearer because the sand filter collected gathered impurities with
flocculant: clean the filter with a back wash followed by rinsing.

LIQUID FLOCCULANT

Clarifies pool water.
• Ready to use, the use is easier than powder products.
• Effective for any pH between 6.9 and 7.8.
• Suitable for all sand filtration equipment.

INSTRUCTIONS:
USING ADVICE, FAMILIAL POOLS
If high turbidity or after a shock chlorination, provide 7 fl. oz. / 2600 gal. (0.2 L / 10m3). Stop the filter, dilute the liquid flocculant in a watering can and spread around the pool. Leave operate 1/2 day, the reaction will create a gray flocculent precipitate to the bottom. Take off these dirts with the pool vacuum rejecting directly to the drain without going through the filter. Then adjust the water level of the pool

Data Sheet   MSDS 1   MSDS 1