CONTROLLERS AND ANALYSERS – ADIN20 START

• Digital Controller DIN rail mounting.
• Backlighted LCD display, 2 lines x 16 characters and 4 keys keypad, for an easy user interface
• 2 set-points with independent adjustment and free relay outputs, selectables in On-Off mode, Proportional or Time-Pause Mode
• 0/4-20 mA Proportional Output with selectable range
• PT100 temperature probe, Level and Flow sensor inputs;
• Setting menu protected by password
• Fast setting by user menu selection, manual control of both relays (pumps priming), runtime monitoring of all outputs and control of the last probe calibration
• Realy n.2 selectable as setpoint or on each alarm signal.
• Statistics of the alarms, of the number of setpoint activations and of the operating time of each relay
• Self-calibration of measure probes.

ADIN20S pH-Rx

• Controller for measurement and control of pH measure range 0.00-14.00 pH, with 0.01 pH accuracy, Redox potential, measure range -1500÷1500 mV, with 1 mV accuracy
• Changing of the monitored parameter by Advanced Settings Menu, protected by password.

ADIN20S Chlorine

• Controller for measurement and regulation of free chlorine available for amperometric Pt- Cu probes
• Measure Range:0.00-10.00 ppm.

ADIN20S CL-J

• Controller for measurement and regulation of free chlorine, hydrogen peroxide, bromine, ozono and each other measure available for amperometric selective membrane 4-20mA probes;
• Measure Range selectable: 0.00-2.00 ppm/0.00-5.00ppm 0.00-10.00ppm/0.00- 20.00ppm/0-200ppm.

Package size: (LxHxW)
120x105x145 mm

Data Sheet   User Manual 1   User Manual 2